Free Classified Advertising for Miners

Classified advertising on the website is a great place to sell or locate used mining equipment, find qualified help, or look for work in the mining indistry. About anything of interest to miners can be advertised on the classified page with the following exceptions:

  • Requests for funding
  • offers to buy or sell gold,
  • mining properties for sale or lease

scroll down to view mining ads

Drilling Equipment for sale.

Have one CP (Longyear) Model 65 banjo mounted core and or plug hole drilling rig. This rig has stand and adjustable locking bracket for operating in mine. Rig is in excellent condition. $ 6,500.00 Firm. Have 3 CP-55 core and plug hole rigs without stands. Rigs in good operable condition. $ 2,500.00 each Firm. Have EX. AW, BW, NW, as well as core drilling rods and core barrels for sale at additional cost.

Recovery Equipment for sale.

Falcon SB2500 concentrator,Otokumpa thickeners 2x10m and 1x 5m, bank of 5 Metso flotation cells, Warman cyclone clusters, 2 x 8/6 Warman pumps. Located in Australia.

Angus Mackirk Orofino shaker table for sale.

Like new. Only 10 lbs of concentrates ran thru it. Works great just not big enough for me. $2000.00 plus shipping. Email for pictures.

Generators and Power Plants for Sale

Have  A 3 M/W Cat  2 X 3512 (1000 Kva) And 2 X 3412 (500 Kva)  Synchronous Controller All Rebuilt With A Cat $150K Spare Parts Package/   $595K ,1 Allison 501 K14A Gas Turbine ~0~ Time, Complete Rebuild With Ducting $860K Usd,1 Caterpillar Solar Centaur  4501 Gas Turbine 4.5 M/W  Total Rebuild By Score / Ge   $1,295K  Usd
All Work Ready

Used Shaker Table for Sale

I have for sale a used gold shaker table, table came from down in Mexico. Table top has Action Mining in the fiberglass top. I have pictures of the table and also a video of it running, I purchased the tables used from a leasing company out of Mexico that went out of business. I have replaced all the wear parts with new parts and these tables were upgraded with 3/4 inch shaft size. The table weight by itself is 386 pounds, I can send pictures.

Winkie Drill GW-15  for Sale

Fully restored winkie drill GW-15  for sale. Also include auger reduction gear box model 7820003. All bearings and seals replaced, new clutch, new motor.  $11,000 USD . Email for pics and info.

Goulds 100 hp Pump for Sale

Goulds resealed pump with 100 hp electric 3 phase.  New paint, looks nice.  600gpm at 380' head.  208 791 1305.  Two pumps rebuilt at 2,000 plus gpm (paco & peerless). Pumps only.  We custom build mining equipment.  Have pics availabel.

Wanted: Dragline Bucket 35 CU yards

We are a Canadian company We are looking for a Dragline Bucket 35 CU yards.

Global Mining Equipment for Sale New Never Used.

GME 10 jaw crusher and GME 14 Hammermill gasoline engines mounted on 16' double axle trail with leveling jack and a R_P4 shaker Table and 2 ton Hopper All new never bin used.

30' Trommel For Sale

30' Trommel used in a dry wall / gypsum recycling operation..... it as an auger in the bottom to collect light material. This as a variety of applications and is in working order..$ 7,500.00

Wanted:  FALCON  / ICON 150 concentrator

used condition at a reasonable price.

Portable gas powered rock crushers for sae.

8" - 20" portable gas powered rock crushers for sale. Also floatation plant, 1 set of Denver sub A's.

Concentrator and Ball Mill for sale.

Knelson KC..CVD6 continuous concentrator in brand
new condition. Has less than 5 hour use in a laboratory.
Never used in production.  Paul O Abbe Inc. Ball Mill Model PM 83 Ceramic lined.
Similar to a model CLM-60.

Falcon C-400 Concentrator for Sale

Falcon C-400 Concentrator for sale. All new internal parts.

Equipment for Sale

Equipment for SaleDenver Ball Mill, 4x8 concentrating tables, Bico Pulverizer, Single shnak ripper for large excavator

Wash Plant for Sale

200 tpr GWP gold wash project wash plant for sale w kobota 25 hp hydraulic unit.
less than yr old. paid $150 k  ask $80 k also older 100 tph unit on floatscan be used on water or land $25 k also all gold room and accessory equipment.
sitting in mexico.

Used Spirals for Sale

Two banks in good condition.Twin start. Further details contact 


Used Goldfield EXPLORER DELUXE and a Used Goldfield GOLDTRON finishing table Wanted.
I am located in Montana

Possible Eqyuipment Trade

Hi, I have a large sonic concentrator I would like to advertise for sale or trade for a knelson type centrifugal concentrator.  Thank you

Mining Advisors for Hire

Project planning "soup to nuts" Our focus is on gold but all extractive metals and minerals are fine.

Hendrix 5 Yard Bucket

Complete with all jewelry and rippers with cat teeth. $10,000

Core Drills and Extensions Wanted

Want to purchase used portable core drill with extensions, bits, water system etc in working order in southwest preferably Arizona. Send photos and asking price.

Mining and Milling Equipment for Sale

SAVE BIG $$$ All kinds of mine and mill equip. Contact me with your wish list. I can get all sizes of equip, from lab size, to as big as you need. Let me save you money. No need to buy old worn out machines when you can buy new at the same price.

Mineral Jigs for Sale

One 12 x 18 Denver Duplex - complete rebuild. , Two 24 x 24 Fourplex - both only used six hours. Two 42 x 42 Duplex IRD - very good condition.
E-mail for more information and/or photos

Jigs Needed Immediately

Placer gold mining corporation, needs immediately 42x42 inch Denver Duplex mineral Jig, used good condition, with stainless steel beds and have access to stainless steel shot put 3/16th. in size.

Diamond Driller needed to drill lode claim near Dillon, Montana

Need driller ASAP. This patented mining property consists of Chimney lode type deposits with well-established drill targets.We would like to offer in exchange for drilling services either a commission from sale of property or royalty if property moves forward into development/production. Open to negotiating these terms.

Safety Person Mine Startup

I am a MSHA Approved Instructor Part 46 & 48 Training Policy
Cal/OSHA certified/Licensed Safety Representative, Gas Tester, Blaster
Fed/OSHA Authorized Construction Trainer OSHA 10 OSHA 30 classes Red Cross First Aid & CPR Member of Nevada County Search & RescueCal State certified state Electrician FIRST CONSULTATION FREE

Equipment For Sale

1)  Bean Royal 50 c/w some small parts 2) Ingersoll Rand Air Compressor Model 20BP 20 hp 230/460 3ph No air receiver 3) Large Moyno Pump Type SSP Frame 2E0ESBForm GDc/w substantial spares

Diamond Core Drillin

A Experianced Diamond core drilling Company looking for immediate work. With the equipment for all size projects specializing in first phase exploration where access can be very minimal with environmental impact a concern and remote drilling, With experience in all of the 11 western states as well as Alaska on fly jobs and remote camps we can get it done for you.

Trommel Needed

Trommel needed ( 100 yph) - also need a drill for core sampling less than 40 feet from surface.  Please send pictures, and location of equipment. Attn Brett

Work Wanted:

I live in the northwest.I have a CDL and some heavy equipment operating experience.I am looking for an opportunity to learn the trade.

Ball Mill and Gemini Table Wanted:

Looking for a used big ball mill for 50 TM/hr mesh 100 or 200. Please send us a photo with price and location.Looking for a used Gemini table. Please send us a photo with price and location.

Mining Engineer available in Western U.S.

Krebs GMAX Cyclones for sale.

6 each NOS (New Old Surplus) Krebs GMAX cyclones model 20-3140. These are in orignal crates and in mint condition. I have a few accessories for them, inlets etc.  For more information please contact me.

Longyear 24 or Joy Drill Wanted

Looking for diamond core drill project  must be able to drill bq and have a mast with wireline and main line a bean pump would be a plus but other pumps ok and running not important as long as all is there can come pick up would like a longyear 24 or joy drill

200 to 400 mesh

Revolutionary new ore crusher. Collider mill reduces rocks to powder in seconds. Portable trailer mounted or stationary units. Quarter ton, 1 ton and 5 ton per hr units. Just need a test unit or do you want to do more? Financing available.

Wanted: Screw Feed Diamond Core Drill older Model Screw Feed Diamond Core Drill. I am making a Mining Display
and need this type of Drill to display. I have a very Old Hit and Miss Engine, so engine
is not important but Drill must be Mast required.

custom built 10 - 15 yard per hour trommel for sale

Complete turn-key operation. It was used for only 3 weeks last season and 2 weeks the season prior for testing purposes only. It comes complete with 2 generators and 2 water pumps.-Mounted on a custom built operational trailer- 10 to 15 yard per hour weighs approx 4,500 lbs $46,000

Tunnel liner/Portal entrance for sale

Galvanized bolt together culvert....22' w by 12' h by 76' long....3 ga.  new with bolts...can be hauled on one load...60k lbs... $94k new....still new but only 30k$......also 9 pcs of 90 in round 12 ga. new with bands  $ 2200 1000$ each.......Boise area.

Project Manager Looking for Work

I have a masters in project management and a degree in engineering. Prior to going to university I worked in the mines for many years. I worked both in the open pit and underground. I can run your project or I can also give seminars on project management to contractor or mining companies.

Used Cat Tracks for Sale

one used set of OEM Cat D9R or N Track groups 30inc pads salt rails 90% remaining have cat measurements  $13000.00 located in BC Canada

BBS 10 Bq Diamond Drill for sale

895 Pounds Can be moved with ATV andTrailer, rated to drill 1200' Comes with 500' of rods and tooling and spare brand new parts Asking 35k, can deliver

Air Tables, Fully Re-conditioned

Oliver Design
Ideal for Heavy Mineral Sands processing especially Zircon.
Two available  USD30,000 each.

Mini Plant Equipment For Sale

4" jaw and grinder mounted together on stand w/motor $4000.  Hammer mill on a stand w/motor $6000. 10,000 gallon fuel tank $5000.  Ball mill -lab size -(steel balls inside) 200 pounds per hour. 2 HP motor single phase. $3000. Older vibrators; Homemade separator; 2" pumps; finish table; AA machine (atomic absorption machine); 60KW generator -on a trailer -runs on propane or unleaded gas -only 118.3 hours; Furnace -propane -size 30 crucible; Furnace -propane -size 16 crucible. pics available. 

I pilot test ore for free milling gold

All water, All gravity. Search youtube for rvbeckner or Searcher Exploration. Ship 100 lb lots to Redmond, Oregon to Rick Beckner. $1/lb for 100 lb. Bulk testing is $.50/lb. Will run 1TPD. I return your concentrate and a sample of your tailings.
Assays and metallurgy are extra. 15 years experience.

Jig ? Impactor for Sale

Brand new 6" jaw and 18" impactor with 13 hp motorTakes  6" rocks to 80 mesh im one pass. wgt. 700 lbs.  Ideal for testing before spending big bucks on production equipment. price $8,000 plus shipping

Mineral Jig For Sale

42 in pan am duplex mineral jig  powered by 13 hp gas motor new bladders, 10 by 6 ft screening plant with 54 in conveyor, bico  pulverizer, 6 by 13 wiffely table  located denver Colorado

For Sale

(2) 40" Jena -Tec Ball Screws, 0-backlash, holds to 1/10,  Never Used !  Best Offer!

Like New High Volume Trommel for Sale

7 x 30 ft portable trummel w/ attached 12'' vib --Grizzly---5 nugget traps
471 detroit 10 x 12 in'' water pump, one elct. 10x12  25 hp,   two dischare covayers, 3000 ft steel 8 '' water pipe. 24 ft sluice w/ hungarrian ripples. 100 kw gen set.   ready to go $160,000 

Equipment for Sale

30+yph trommel,water pump and large spiral wheel

Equipment Wanted

42" duplex jig,  30" cleaning jig, and a large cleanup table.
Also 10" X 12" or 12" X 12" waterpump with or without power.

Electric Motors for Sale

Electric motors for sale 5 to 200hp 460 volt tefc and odp-mags for sale size 1 to size 5-electronic softstart for 200 hp and 300 hp-various transfomers etc.-8 baldor type 2 freq drives 30 hp 

Large Generator for Sale

1360 KW CAT SR4 Generator with Diesel Engine on flat bed trailer. The generator
was inspected and doubled dip for weather protection last august and the engine
runs strong. This set up is totally mobile and ready to go.

Used Rock Crusher Wanted

with roller for small scale mining operation.  8" or better opening; prefer diesel motor; 13-20 horse; processing 1 ton per hour. Need immediately. Will pay cash.

Wash Plant Wanted

Arizona company looking for a 100 tph wash plant for placer operation. Grizzly to Trommel to sluices to all discharge conveyors.

Reclamation Contractor

Providing Reclmation services and consulting for all types of mining operations.

Fairfield Engineering Unloading and Stacker System For Sale

Installed by Fairfield Engineering in 1999.  The system is a rapid discharge coal unloading system using 4 hoppers and a 72" conveyor system capable of 4000tons/hr at 650 fpm. It includes a J B Long sampling system, a bag house, a set of belt scales, sampler, and magnetic separator. Buyer will be responsible for the de-construction of this system.

Heavy Equipment for Rent

heavy equipment rental and operation services:  dozers, loaders, excavators, graders, crushers anywhere any conditions, mines, oil fields, roads.

Wanted - Longyear Core Drill Units

Lookingt to buy used LONGYEAR core drill units any condition

Wanted: Mining job/geologist/surveyor helper

I am a Canadian looking for any mining job anywhere in the world for a new person in the field. I don't have any related experience, but I am educated with engineering background and mechanical/maintenance jobs experience.

Brand new 18" impact mill for sale $3,500

New 13 hp gas motor with electric starter, 18 " impact ring, all steel construction, and heavy duty bearings. This mill is not a toy, standing 48" high x 24" long x 18" wide, can grind 1" to 2" ore to dust at 1-2 ton per day. ideal for field testing large samples before going into proguction.

Equipment Wanted

I would like to place ad to purchase small to medium size propane furnace,crucible,tongs etc. Also wanted m7wave action table,preferably long leg,sieves and single phase.Deister replacement mat. Please contact me at

Gears and Engineering

We  can rebuild & machine all types of gears = pumps = gear reducers = vacuum pumps = water pumps = shafts = o-d & i-d work

Heavy Equipment Wanted

We are looking for Komatsu 685, 730, and 830 trucks as well as Cat 793 trucks

Trash Pump Wanted

Looking for good operating trash pump 8"

Heavy Equipment for Sale

I have wheel loaders, dozers, excavators and scrapers for sale  also have a TBM tunnel boring machine

Diamond Core Drillers and Helpers Wanted

Black Rock Drilling is a fast growing surface diamond core drilling company with operations in the western US and Alaska. We are currently seeking applicants for Foreman, Driller, and Driller Helper positions. Must be able to work in the US, and possess a valid driver's license. Top pay for qualified applicants with excellent potential for advancement. Please send resume/CV to email address

Manager Wanted

Manager for a new mineral processing facility in Phoenix, AZ. Must have experience in leaching and processing of different ores and concentrates. This will be a production facility and you will be in charge of all aspects of the facility. Knowledge of laboratory procedures, assaying and leach testing a big plus.

Re-conditioned Magnetic Separator for Sale

Fully re-conditioned Rapid 3 disc magnetic separator.Ideal for smaller mining operations for separation and removal of magnetic particles.

Work Wanted

Man looking for job at placer mine.25 years of mechanical experience including repairs of heavy equipment welding fabrication and all around maintenance.hard working and will relocate anywhere and will work for small percentage or what is fair.

Action Mining M7 Wave Table for Sale

Action Mining M7 Wave Table. This is a 2011 model. Email for pictures and more info.
Depending on your location, airfreight shipping is included in the price. S A $4.500.

1987 Caterpillar 613C for Sale

1987 Caterpillar 613C self loading scraper with 9070 frame hrs. New motor, trans and torque converter. Good running and operarating condition. Asking $21,000.

Need Pinon for Marcy Ball Mill

We need find a small pinion for a marcy ball mill 5´x6´,the pinion,has 13 teeth and is helical

Gold Recovery Equipment for Sale

Marcy 5x7 ball mill 100tpd, 150hp, on stand. Denver 24's floatation tanks, complete. Leech tanks, fine ore bins. Comlete circuit available.

Diesel Water Pump for Sale

Volvo TD71 diesel engine with water pump attached can pump 305 gallons per second this unit is used and in good working order only run 240 hoursmathew.

Jaw Crusher for Sale

METROTRAK 900x600 Jaw Crusher. 1999 Magnet and Side Conveyor included Hopper Lined with 15mm Hardox Steel Plate New Clutch, New Jaw Plate, New Discharge Belt Back Plate ö 25mm Thick Hours: 5,000 - Fully Serviced by Pegson Price: £80,000 in great condition.

Caterpillar Haul Truck for Sale

I have a Caterpillar 769B haul truck to sell. Excellent shape. Also a Cat D7F dozer with winch.

Mine Engineer and Coal Mine Workers Wanted

We are the fast growing coal mining,coal concession development,coal trading & shipping is seeking for highly motivated,dynamic, ,  qualified and experienced candidate for the position of : MINE ENGINEER – COAL MINNER WORKERS,  Male, age Minimun 25 years old and above –– More than 3 years experience in Coal Mining [...] Salary $8,000 - $31,000 per month contract agreement  24months. If you are interested forward your resume/CV for assessment and contact me directly for further negotiation. 

RC Dill OPerator Wanted

Looking for an experienced RC exploration for projects in Mexico, beginning Jan 2012. Spanish speaking and foreman experience are key assets. Generous contract package plus bonus for pay dirt.

Help Wanted

Phoenix Mineral Exploration is looking urgently looking  for Surface/core Drillers and Drillers helpers for long and short term work on our projects in Southern Arizona and Nevada.  Must be legal for US work and have first aid etc.  Great rates of pay.

Hydraulic Rock Drill for Sale

Year 2000 Tamrock Dino 500 Hydraulic rock drill For Sale
1700 percusion hours and 2200 engine hours.  Very clean and well maintained.

Mine Engineer and Coal Miners Wanted

We are the fast growing coal mining,coal concession development,coal trading & shipping is seeking for highly motivated,dynamic, ,  qualified and experienced candidate for the position of : MINE ENGINEER – COAL MINNER WORKERS,  Male, age Minimun 40 years old and above –– More than 3 years experience in Coal Mining [...] Salary $31,000 per month contract agreement  24months. If you are interested forward your resume/CV for assessment and contact me directly for further negotiation.

Looking for Jaw Crusher

250x400 include all components,diesel power generator 15kw,300v or more w/3 phsae if possible and also diesel trash pump 80g/min..send in pictures +specifics.

Jaw Crusher Flywhhel Wanted

I need a flywheel for a 9x36 telsmith jaw crusher or a set of flywheels around 38" dia.

New Trio TV95 ROS VSI For Sale

New VSI for sale $65,000 or best offer New Trio TV95 ROS VSI for sale, includes two 250 hp vertical motors. Never installed, priced to sell quickly.

Double Drum Slushers and Scrapers Wanted

We are looking to buy new or secondhand air and electric Double Drum Slushers / Scrapers and Hoes for import into Australia

Trommel Wanted

75-100 YPH Wash Trommel Plant in good working order. Hopper/grizzly feed and conveyor. Preferrably located in the lower 48 states.

Work Wanted

I am a 28 year old miner with 6 years mining experiance, Looking for a drilling job , surface or underground, I have been drilling for most of my 6 years underground. Specialize in very difficult ground, drilling, blasting raises, and production drilling.I am interested in international jobs but am willing to work anywhere.

8' x 25' Trommel for Sale

Electric powered. Make offer. Please send inquiries for pictures to

Bico Pulverizer for Sale

3k or best offer 303 258 1012  it is powered by a 3 hp and is very heavy   great for assaying  grinds to 200- 500 mesh

Used Reconditioned Cranes for Sale

Reliable Used cranes15 ton - 100 ton

Fully equipped Diamond Drill for sale

Located in Fiji. It is mounted on a rubber tracked Marooka.
It is equipped to drill PQ3, HQ3 and NQ3 and comes with
all rods, core barrels bits supply pumps and a support

Experienced Diamond Drillers Wanted

Experienced Diamond Drillers Wantedfor hydraulic and conventional drills. Work is located in the US and Canada. Must have valid first aid. Up to $600 a day + bonus.

Work Wanted

Living on Vancouver Island, willing to travel north.
 Earth moving background- excavator, front end loader, Cat.
 Certified welder.

Wanted Small Denver or similar Mineral Jig

Wanted: Small 8x10" Denver or other assisted duplex mineral

2 Shaker Tables for Sale

2 by 4 shaker table 5 by 14 whiffley table 3 by 8 table,  12 inch mineral jig  $300, 


 This plant is in excellent condition, will currently handle 225 TPH and can easily be modified for increased production up to 300 TPH.  Ready to ship


Eagle 15-36 portable rock crusher for sale

1993 Eagle 15-36 portable rock crusher, with vibrating feeder, 3x6 vibrating screen, 30'' discharge belt, onboard 40 kw gen set, onboard hydraulics with hydraulic leveling rams all mounted on a tandem axle trailer. Also have a 966 C rubber tire loader. is running and working but needs some work. both units are currently on a job. asking $ 95,000 for crusher or $ 110,000 for both. photo's on request.

Looking for Small Bio-Leaching Operation

I'm looking for someone that has a small Bio-leaching operation, that can crush and process, High-grade Ag,Pt, Pb, Pd, Co, Ni, Zinc, and alittle Rd ore

Earth Moving Equipment for Sale

I have a large amount of earth moving machinery for sale , Excavators,dumptrucks and loaders. Please contact me for more details. Also I am looking for an all-rounder to help set up a screening plant for gold . The job will be installing and operating a 300 tph Alluvial Gold Ore Plant to extract gold concentrate, which will be exported to China in lockable tubs.

For Sale: 2004 Hitachi Excavator

For Sale: 2004 Hitachi ZX200LC  Approx 3500 Hrs, Great Excavator,
Location OR $50,000 or Best Offer. Request Picture.

Project Manager Looking for Work

I have a masters in project management and a degree in engineering. Prior to going to university I worked in the mines for many years. I worked both in the open pit and underground.  Looking for work overseas. I will be available for work after the second week in June, 2011.

Generator Sets

440kW Generator Set—Price $27,000 - Detroit Diesel V12 – 1973 Recently reconditioned for $18k run very little since.Radiator cooled 2 blown turbo chargers and 2 exhaust 24 volt starter 24 volt alternator 2-4D batteries. iStamford kW 440 Generator 60Hz-3Phase 1,800 rpm Mounted on aluminum floor. 40' Utility Trailer- 1971 GVWR – 50,000. Located in NW must sell immediately.

Equipment Locating Consulting Service

Consulting services for equipment locating, purchasing, application, and dispersal. Crushing and material handling/processing equipment a specialty with 40 years experience in the industry.

Gravity Recovery Plants

We sell complete modular mining process plants for recovery of gold/chromite/tin/tantalite/silver etc. 


s750/300 Compressor, KTA19 Cummins Deck Engine. 5 Rod Carousel Loaded W/ Steel.  Mounted On  Tracks. Good Condition

Want to Buy Equipment

2 caterpillar d11t new or low hours with ss/ripper / Fork lift any cap 30 tons & up
Kalmar reachstaker for containers 45 tons & up /Caterpillar 992g low hours2 caterpillar d11t new or low hours with ss/ripper / Fork lift any cap 30 tons & up
Kalmar reachstaker for containers 45 tons & up/ Caterpillar 992g low hours

Core Drills and Equipment

2 Foremost/ Mobile B 61 HDX Core/Rotary rigs Mounted on Ford tandem axle 6X6 trucks (will drill HQ 2000+ feet). Fully hydrostatic. Diesel up and down.1 Foremost/Mobile B-53 vertical and angle core/rotary rig mounted on trailer.Rig capable of 1000'+ of HQ.2 Ardco support vehicles (listed on this site)1 Ardco geophysical logging buggy w/Century Series 6 logging system (capable of 2000' depth) Other drills and equipment availableWould like to put these rigs to work

Looking For Work

jackleg miner, jumbo operator 12 yrs experence
mc clane bolters, ore trucks, longtoms, track drift, sill mining, stope mining,
Dave Chapman jr

Wanted Mining Equipment

Apron Feeder 84" X20' to 30' Long    NICO/Stephen Adamson
Apron Feeder 72" X20' to 30 ' Long   NICO/Stephen Adamson
Gyratory Crusher 42' X 65'  Allis Chalmers MKII
Gyratory Crusher 54' X 74'
(2) 48" X 96 " Magnetic Drums 2500 Gauss at surface
(4) 36" X 96 " Magnetic Drums 2500 Gauss at surface

PC750-6 Komatsu

pc750-6 komatsu exc near port in florida, wa500- 1L loader ready to work, 3 22b B-E draglines, gen set  150 kw w/ komatsu motor  many cat 950 loaders   

Rotar 1400 Excavator Mounted Screener 

Rotar 1400 excavator mounted screener  25-35 ton excavators new c/w all controls Operation and installation manuals etc cost $45000.00  plus taxes fob Vancouver BC. Perfect for gold mining - pre-screening and washing and loading your gig  from the seatof your excavator - separate and places overburden away from  your equipment all in one aasy and quick motion $20,000

Compact Crushers

Komplet compact crushers save TIME, MONEY and MANPOWER. The Lemtrack 48-25 crushes all day on only $40 fuel.  The Lemtrack also has a feeding belt that makes feeding the jaw simple.  This machine will eliminate cost on trucking, landfill fees, and fees for new road base.  Very mobile and great for miners

Wheel Loader Wanted

I am looking for all kinds of caterpiller sizes for sale. Please send picture.

Flotation Plant Wanted

A complete flotation plant to run 10-50 tons/day. From first crushing to filtering, especially for Ag an Cu flotation. Crushing and grinding equipment optiona

Raymond Coal Crusher

We have a Raymond Coal Crusher and Discharge Fan for Sale $25,000. Also have two Sullivan Drills for Sale.

Ore Processing Equipment For Sale

CONTINUOUS-FEED 1-TON PER HOUR processing plant for most types of ores.
Includes jaw crusher, rod mill, shaker table, continuous-feed charged mercury amalgamator, commercial retort, hydromatic jig and various augers and gravel pumps. Excellent condition. $45,000. (Located in Siskiyou County CA, Sold as Complete Package Only)

Core Drilling Wanted

I need to get some core drilling done on some claims in Arizona. 100 - 200' holes at an angle. If anyone can help me out please let me know.

Tool, workshop Van for Sale

I have a 18'- 1966 Chev. 3/4ton Step Van, that I'd like to put on your free ads. Runs good,has a work bench, 2- shelves, 2- cabnets, and a 3x3 bolt bend and alot of storeage space.Located in Deer Lodge, Mt. $1200.

Contract Processing

We are a NW based company with expertise in leaching and processing of gold ore. We can process your ore, tailings, or provide contract due-diligence for your site.

Flotation Plant Wanted

We need one set of complete flotation plant from first crushing to filltering especially for Feldspar flotation with 50 t/h capacity feed.


Big Horizontal Impact ROLL Crushers for Sale

For sale Big Horizontal Impact ROLL Crushers Kloeckner-Becorit ready to work condition, for sale Extec C12, C10, S-3, S-5-, S-6 and more

Looking for Arizona Leaching Facility

Leaching facility in Arizona wanted. I am looking to process 10t - 30t/day.

Double Layer Trommel For Sale

I have a 150 yard per hour, double layer trommel (2007) for sale (6' x 42'), comes with 2007 260Kw Daewoo Generator (1200 hours only), 2 brand new submersible water pumps (6 inch) and three brand new 8 inch submersible water pumps. Hopper and sluicing box, 2 brand new spare electric motors for trommel. All works well and effeciency (all in use right now). located near to Carmacks of Yukon, Canada. asking $300,000. picture upon request, Financing available.

Dragline Operators Need Work

Dragline Operators , two brothers , day and night shift , 30 years plus exp. each digging underwater , 4600 Manitowoc , Bucyrus and the rest. Currently working in Grand Cayman , can provide current video

Looking for Equipment

Looking for equipment for small Placer Mine operation, need Wilfrey Shaker or Gemini Table, Small Concentrator, and Crusher, equipment must be in good, and operating condition. Email pictures and contact information

Placer Gravity Separation Equipment Wanted

Looking for good used small Falcon or Knelson centrifuge concentrator for start up placer operator.

Scrap Metal Wanted

We buy all kinds of scrap including complete factories, process plants, locomotives railcars etc.. We also buy used gen sets/engines valves boilers. copper ss brass al lead mag silver gold plat iron steel rail track rebar cable.

Small Recovery Plant for Sale

Small recovery plant for sale. Located in Peru.

Used Jaw Crusher Wanted

I want a used jaw crusher in the 10 x 20 to 15 x 24 range prefer one less than 4 tons. Old is OK.

Equipment Operator Needs Work

I am a heavy equipment operator (exavator,wheel loader,dozer,dump truck cat 775;735;740,boomloader,mobile crane 5ton) I have 10 years experience in their respectevly field.and i am ready for anywhere in the world.

Dredgers Needed

Dredgers to dredge beach placer gold property in Southern Alaska. Remote location. No amenties. Cold water, dry suits recommended. Season to last until Sept. Operators with equipment given priority. Not for the faint of heart.

TimKen Percussion Rock Bits

4 brand new never used along with the carton :Straight shank ,Venturi Air holes ,Domed Carbide(14). Timken # D9 BL Timken USA 18 AF 4


I have 2 Tranteq 5 ton underground haul trucks. They are like the young buggys. they are epa certified for underground. They have a 4 cyl. Duetz engine. Engine # f4l 914-6538-m s/n 8758412. EPA cert # 6dzxl06.5042 year 2006 weight 9200 model umt5. Pictures are available upon request. Very good condition. Ready to go to work. Sold new for 130,000.00. the most hours on is 300. $75,000.00 each

Work Wanted - MSHA Electrician / Fitter Welder

looking to travel in the US for construction jobs at mine sites. Im a West Virginia black hat miner. Im certified MSHA electrical both above ground and below. I have over 20 years industrial experience and over 20 years welding and fabrication experience. All my certifications are current. I also have a current 5000-23. I have a clean driving record and dont play with dope. Im not interested in working a production mine. Construction only. I travel with perdiem only.


rock crusher with 8" jaws to pulverize to the size of pea gravel.powered by 20 hrs briggs and straton attack to battery and crush,attach a generator to that and you are self contained.This unit is on a trailer and ready to work.


Small shaker 4x8 and 5x16 shaker screen. Also I have a 24 foot trommel built, but never cut the holes in it. small screen - 6k larger screen - 10k Trommel- 19k


Portable Crushing Plants For Sale Large Selection of Crushing & Screening Equipment for Sale or Rental Tracked Jaw Crushers, Cone Crushers, & Impactors. Wide range of Screening Equipment from Grizzly Scalpers to Triple Deck Mobile Units We offer both New & used Washing & Conveying Equipment.


BOYLES XR 78A core drill portable unit. 23FB BRIGGS ENGINE. Runs good. No drill.


Wanted and for sale mmd sizers wanted hagglaunds motor mb 1600 ma 800krupp apron feeders


For sale 10x24, jaw set of rolls, cedarapids 443 plant with 155 kw gen set and radial stacker, 950 cat loader, D8H with kelly ripper, and more. 18x36 twin jaw


Wanted mining and processing contractors and experienced mineralogist having knowledge of pegmatite deposits in India.


Wanted: rh200 o&kor a rh340 hhydraulic crawler shovel. Prefer low hours & exc. Condition. Wanted: ex5500 or pc5500 hydraulic late model crawler shovels. Wanted: several 789c , 793c , 797c caterpillar offroad trucks. For sale 2 -75 cubic yard draglines . Also 2-20 yard draglines for sale. For sale 17 cubic yard elec. Crawler shovel. Very low hours. For sale 2 offroad 150 ton lowbeds for sale. Located in n. America.


Over 10 years mining experience alluvial placers, familiar with all machinery, currently working as a foreman looking for career advancement oppurtunities.


I am a diamond driller,operations manager,drill supervisor,foreman,driller with 15 years experience. I have drilled in Canada,Mexico,Afica(West Africa/Sierra Leone/Monrovia)(East Africa/Eritrea)/Nicaragua/Peru & Vietnam. I speak both english & spanish fluently and adapt well into the culture of others. Experience with SRS-900/960/1200,JKS-300,B-20/B-15,Hydracore 2000,hagby onram,Falcon-1000. I am quite versatile and can multitask & micromanage crews for production.


I am a 45 year old miner with 25 years mining experiance, Looking for a drilling job , surface or underground, I have been drilling for most of my 25 years underground. Specialize in very difficult ground, drilling, blasting raises, and production drilling.I am interested in international jobs but am willing to work anywhere.


complete coal preparation plant....all or part...many converyors, radial stackers, crushers, screens (new and used) ect....please email for more information and I can send you a link for detailed photos.


We buy equipment in any condition. We also buy your excess inventory from Caterpillar, Komatsu, Hitachi, and so on. We also offer Cat New Surplus Parts: rebuilt components (Engines, Trans, Torques) rebuilt with Cat parts and Dyno tested. All components have a 6-month or 1000 HR warranty and come with a money back guarantee. All used parts are inspected before shipping and we have stock new and rebuilt buckets. Over 35,000 Caterpiller OEM line items in stock! Cat Dealer Rebuilt Engines in stock at this time: D8R, 988B, D6M, D5M, 773B, just a small sample! 30-40 percent savings on Cat parts! NOT AFTER MARKET. Over 30 engines and 25 transmissions for Cat heavy equipment in stock!


2003 HAZEMAG APSE 1515Q Portable Primary Crushing Plant with Hazemag 1515Q Impactor Electric Engine 500 HP 500 Tons per Hour 62" X 20' Simplicty Grizzly Feeder 15 yd. Hopper 48" Front Discharge Chassis is New Fabrication Excellent Condition! Sale Price: $425,000


Used CATerpillar DUMP TRUCKS for sale. Run for 2 years in MONGOLIA in GOLD MINING. Each has extra engines and spare parts.




Eastern Kentucky surface mining operation looking for experienced driller and/or geologist to head up exploration


Looking to work for any operation west of Tamaqua, PA. I recently recieved my surface permit. to mine coal here as my grandfathers, and their's before. unfortunatly I had no intention to dump river sediment." no drive daily for this backcountry", 4th generation coal miner. But I am willing & able to move to do some real mining prec.metal min./softcoal . my only requirements: operater/owner interested in hard worker.decent pay & place to stay.


Large mine ore bucket for sale, about 45 gallons, located in Leadville, Colorado.


National Sales Manager needed by growing company. Must have experience selling to the surface mining industry (capital or commodity) and demonstrated success in management. Company is very financially stable, highly professional and growth oriented. Excellent benefits and relocation provided. Six figure compensation. If you are a tram player, have impact and a leader this can be a professionally and financially rewarding long-term career. Degree in engineering preferred. Email resume to:


Looking for used GD 83 Drills, good condition to use either as leg drills or Sinking hammers,


dense media seperation plants for sale (DMS) for the diamond industry, all plants are mobile can be transport overland by truck, (plant range from 5 ton to 50 ton dms) bigger units availbe and bulit to clients specification


I am looking for a small gravel crusher. A 10 by36 or a 10 by 24 jaw screen unit POTTABLE .


We currently have for sale a complete range of spare parts for Liebherr R994 backhoe, undercarriage's, base units, front end equipment..... anything your looking for your Liebherr R994.


We are interested in purchasing a complete Merrill-Crowe Pilot Plant, capable of handling 5 to 50 gallons/minute. Please contact me with details, including plant condition, FOB price and approximate shipping weight and dimensions.


Looking to do contract mining,underground.Have all the nessesary equipment to mine 50 tons per day,Rubber tire or rail,and shaft.USA or Mexico.


looking for cat loaders all models . all sizes


Wanted - used jack leg 83 drills or parts, bazooka drill, skrew classifier, pond liners, electric trammer


Underground Mining Contractor drifts, raises, shafts, diesel and track references by request


have tunneling machine 4 sale IBS -130 1997 low hours 132 kw cutter head 157 " cutter height

216 472 3617


Wanted several Diesel trash pumps 4" or 6" with hoses and fittings. Also a good size excavator. I need owner financing. They must also be shiipped to West Africa. Yeah, I know sounds bad but true. I am in Mid US.


looking for old gardner denver ATD 3100 for parts


Wanted; used sheaves and rigging components for electric draglines. We rebuild the same.


Nordberg LT140 Lokotrack Year 2000 ONLY 1,870 situated ASIA-PACIFIC Large quantity of spares. Dissasembled ready for Package/shipment


Hi my name is simon, and i am a 360 excavator driver i can also drive a dozer i am looking for work i have 15 years experiance on machines. I have done aiot of quarry work and open cast mining.I am willing to travel any where in the world would like to go to middle east . bags are packed ready please contact me.


I bought a used magna dyne table and a roaster both were manufactered by a company named thermo dyne..they have since gone out of business so i cant get info tech info on them...if anyone has one or knowlege on operating them please email me.


Looking for a winkie c/w ready to drill to a depth of 400 ft including bits to drill 10 holes @ 400 ft f.o.b st john's NL


Wilfley Pump 8" x 5"..........double 8" inlets Pump has been rebuilt within the last 2 months. Has 100hp motor, new paint, runs great. We ran it regularly, but it is has been replaced with a larger pump. Available immediately. Price $8000.00


I am mine engineer in Turkey for 21 years.I have expirience in marbel coal mines and want to work in the United States.


Over 10 years mining experience raise, shaft, narrow vein, rock development, familiar with all machinery U/G, currently working as a U/G foreman of a large crew for nickel mining company looking for career advancement oppurtunities.


We are looking for wanted used Cone Crusher , Crushing plants and Screening Plants and the same in Rental basis for following criteria Cone Crushers in the following make - Nordberg(GP200), Metso(HP200) , Cedarapids(RC4511) and Svedella Screening plants in the following make - Fintex , Extec S5 & BHP and wanted Crushing plants and screening plants in above make for rental basis also.


GoldKacha Gold Concentrators and Scrubbing equipment for all minerals


Bolt Tension and elongation monitors for mining circuit applications. Bolt failures on Ball and SAG Mills have been common for many years and these cause costly un-planned downtime. Use of Boltstress's on-site service technicians prevents bolt failures and leads to better returns for the operating companies.


Ex british military ( S.A.S.) looking for high risk work. Lot's of jungle and desert experience. Will go anywhere anytime.


TBM/microtunnelling operator seeks employment, worldwide experience of 20 years in all aspects of tunnelling.

O&K RH40D Front Shovel for Sale

year of manufacture 1991, hours 11,500, engine Cummins, undercarriage is 90% good, ring good, pumps good, equipment good,


75 YPH Goldfield alaskan trommel for sale. 30" x 60' stacker, two 42"duplex jigs, 36" x 45' Kolburg feeder, misc. pumps. 12 yard loader, and14 yard haul truck. All in good condition ready to go to work.


1-Storm Vulcan surface grinding machine with 3' x 15' hydrolic bed with magnetic bottom. Good Condition. 3 phase. All hydrolic pumps rebuilt. Asking $12,000. 1-Stainless Steel Mixing Tank-8000 gallon tank-steel made out of 316-S stainless steel. Inside tank made out of 3/16 thickness with mixing motor and geerbox on top. Has a water chamber around the outside for heating the tank. Has a gas boiler with circulating pump to heat water around the tank. Has a catwalk around top of tank with ladder. Will take $20,000.00 or best offer. J-VAC Filter Press System with boiler and steam evaporator built by US Filter. Only used 6 times, practically new. Model # 1000V30-22-16SSYLC. Worth $240,000 new-will take $50,000. 1-Knelson Concentrator - 40 ton per hour. $12,000.00

Used Mining Underground Locomotives Wanted

Looking to purchase used mining underground locomotives

Plant Wanted - Ball Mill Wanted

We are interested in a plant for 30 ton to 70 ton/per day plant. Also need a ball mill.

2 Humphreys double start sprials for sale

I have 2 Humphreys double start sprials in frame in excellent condition for sale.

12"X10" water pumps for sale

I have (two) 12" X10" 4,000gpm Deming water pumps for sale. Each w/100hp electric motors. $3,500.00 usd each I will send pictures on request.

Generators for Sale

Four units 2500 kw continuous, 2750 kw standby general motors (emd) Type mp-45 completely metal enclosed and housed in a Weatherproof, sound insulated enclosure. Each unit has a 20 Cylinder, 2-stroke cycle, 900 rpm turbocharged diesel engine, Model 20-645-e4 with woodward egb-10 governor, direct connected To an emd model a-20-c 3440 kva synchronous ac generator, 3/60/4160-2400v, 826/477 amps, 0.8 % power factor complete with All auxiliaries and controls.

Work Wanted in Chile

Wanted work any where in Chile for English speaking and some Spanish! plant operator all "rounder" I.e. excavator all sizes to 200 tons dump trucks 50-80 tones front-end loaders all sizes 50tons 20 years work history from uk and currently Australia, any names of companies or people that would be of help would be very help full.

Goldfield 10 or 15 Washplant wanted

Am looking for a used Goldfield 10 or 15 washplant

Equipment for sale

2-Fuel Trucks (water if need be) 2-Amerin mixbodies for AN/FO suitable for open pit mine of explosive suppier with chasis body if needed 7- ASME approved pressure vessels 2,000 and 1,000 lbs capacity 1 large diameter Reedrill 9.5" to 12.75" with new head, New computer on board, Undercarriage rebuilt to new, comes with steel and spare parts list of $50,000 4-150 Cat engines with only 1,800 hours of use.

DTH hammer and bits for sale

I have wide experience and series of high quality products 1. Button bits, connection tapered or threaded, diameter from 33mm to 127mm; 2. Cross bits, connection tapered or threaded, diameter from 28mm to 95mm; 3. Coupling sleeves, R25, R32, R38, T38, T45, T51; 4. Down the hole hammers, similar or equal DHD, COP, SD and BR etc.series hammers; 5. Down the hole bits, similar or equal DHD, COP, SD and BR etc. series bits; 6. Diamond materials and tools, core bits and saw blade, Core bit & Reaming shell NQ, BQ, HQ, NQ, etc,, Synthetic Diamond & CBN Grinding wheels, etc. ; 7. ODEX system.

Mining Technical Specialist Needed for assignment in Nevada

A minimum of 13 years experience as a Mining Designer with underground mining and/or tunneling design experience and demonstrated proficiency with Maptek Vulcan software, preferably Version 6.0 Looking for someone capable of updating the Vulcan model of the repository subsurface layout as the current design evolves to meet new requirements and ideas. A prime responsibility will be familiarizing and training existing staff with Vulcan. Per diem will be available for this assignment. Please send resume to and indicate Mining Technical Specialist in the subject line.

10"X12" diesel powered pump for sale

engine is a newly rebuilt 855 cummins, pump is a Gorman-Rupp 10x12 w/foot valve, pushes 175 foot/head, unit is mounted on a skid w/ small start up fuel tank. pictures and price on request

We buy scrap

We buy all kinds of scrap including complete industries/ships/etc.. We also buy used gensets/engines for our clients from time to time due to power shortage in india.



Wanted: Shaft for Telsmith Jaw Crucher

wanted shaft for telsmith jaw crusher 10x36B5 shaft Shob no.6605 . Also need bearing S-3161-B 6.5 inside dia. HN3 tonlngton.

Metal Detector For Sale

I have an older Whites detector I would consider selling. It would be a good beginner's first detector. Email me and we can talk about it!

Placer Equipment Wanted

Looking for good used Gold Screw Trommel and small Falcon or Knelson centrifuge concentrator for start up placer operator.

Dt-466 eng and auto transmisiion

I have 4 Dt-466 eng and also auto trans. 1999 to 2002 and other parts. E-mail us for a list of parts.

Wilfley Tables for Sale (and other brands)

We have a number of Wilfley Tables, Buthart Tables and others for sale. We can freight all around world.


CAT 980C SN:63X02897 63X08347 USD35000 FOB 966E USD45000 FOB CAT 966F SN: 8BG00804 USD42500 FOB CAT 966FIISN: 8BG02267 USD65000 FOB KAWASAKI KLD85Z SN: 744/2246 USD22000 FOB KOMATSU D85A-18 SN:35548 USD45000 FOB KOMATSU D85A-21 SN:34558 USD45000. Located in Shanghai China.


Experienced hardrock miner/manager who when back to university and obtained a degree in engineering is looking for work as project manager. Any company in Canada who wants to get the job done on time and on budget, please email me


I do Labor contracting for any mining companies. I'm an experienced Miner/Manger with a Degree in Engineering. I will hire all experienced personnel required. I will also do the project management.


Wanted: a used Goldfield Alaskan 25 or a Yukon model.


we are selling a link belt crane model 1980 , 20 tons capacity, all terrain , hydraulic boom 25 mts long aprox, god conditions ready to work; also we have a new jaw crusher made in mexico 20X36 complete with polley and flywheel, no electric engine inclueded.


Just send us your classified ad copy and we'll do the rest.

(note: we reserve the right to edit the content and number of ads)


lode listings small placers other minerals 10 newest listings joint ventures loans wanted
patented turnkey large placers sold listings links view all listings
lowest priced mines home get listed Dredges for Sale Higbankers for sale